Arm-hole
Measure all around the arm opening area where the sleeve or bodice opening would sit.
Bride Measurement Guide
For the best fit, please measure with a soft tape measure and follow the guide below. If you can, ask someone to help, it’s more accurate and much easier.
You’ll need a soft tape measure, a mirror, and ideally a friend. Stand naturally, don’t suck in, and keep the tape level where relevant.
Wear the underwear or shapewear you plan to wear with your gown. Avoid bulky clothing.
Keep the tape flat, not twisted. It should sit snug against your body without digging in.
Repeat each measurement to confirm accuracy. If it differs, take a third and use the average.
Follow the guide below for each measurement shown in your measurement chart.
Measure all around the arm opening area where the sleeve or bodice opening would sit.
Measure around the fullest part of your upper arm. Keep your arm relaxed by your side and the tape comfortably snug.
Measure around the fullest part of your bust, keeping the tape level across your back.
Measure at your natural waist, which is usually the narrowest part of your torso.
Measure around the fullest part of your hips and bottom, keeping the tape level.
Measure your full height from the top of your head to the floor while standing straight and barefoot.
Measure from the hollow at the base of your neck straight down to the finished hem length.
Please complete the form below using the same measurements listed on this page.
Arm-hole: Upper-arm: Bust: Waist: Hips: Height: Hollow To Hem:
Please make sure the form fields match the measurements listed above.
Send your exact measurements and we’ll advise the best fit.
Yes, but it’s best to have someone help. If measuring solo, use a mirror to keep the tape level and take each measurement twice.
No. Measure over underwear or shapewear only. Thick clothing can affect accuracy.
That’s completely fine. Send through what you have and we can guide you if anything needs checking.